| Q: |
What colours or effect can
I have? |
| A: |
We have an extensive selection of coloured glass finishes with
effects such as metallic and Pearl shimmer. We can also colour
match any paint chip or object to achieve the colour that you
would like. |
| |
|
| Q: |
Is our glass transparent or opaque? |
| A: |
Our coloured glass is completely opaque therefore you don't
see any patches on the wall through the glass |
| |
|
| Q: |
What condition do my walls have to be in for installation? |
| A: |
We can install our coloured glass on most surfaces that are
reasonably level with no hi spots sticking out; this includes
walls made from rendered, plaster, villa board, and repaired
walls etc. |
| |
|
| Q: |
Is Polytech coloured glass safe? |
| A: |
Yes! Our coloured glass is suited for most conditions such
as moist and heat areas, as it is toughened safety glass, (know
as tempered glass) which is certified to meet Australian Standards
AS2208/1996 and AS1288/2006 for use in domestic and commercial
settings. |
| |
|
| Q: |
Can I have power points or light switch’s in the glass? |
| A: |
Yes! This is no problem; as this is taken into account when
we measure to allow for cutouts in the glass, ensure these are
all fitted in walls prior to check measuring. |
| |
|
| Q: |
At what stage is my project ready for measuring? |
| A: |
For a kitchen splashback this is ready when all cabinetry are
installed, including overhead cupboards, flyovers, bench tops,
power points, switches, architraves, stoves and all fittings
where the coloured glass is going to be installed. |
| |
|
| Q: |
Can I have coloured glass behind my range hood canopy? |
| A: |
Yes! The range hood needs to be pre-fitted and fixing points
need to be installed or marked out, also pre-fitting of ducting
or marking out is necessary. The coloured glass gets installed
first and then the range hood canopy. |
| |
|
| Q: |
How is the coloured glass installed to the walls? |
| A: |
The coloured glass is installed using Strong industrial adhesives.
The perimeters are sealed all the way around, making it completely
sealed. |
| |
|
| Q: |
Is it a tidy installation? |
| A: |
Yes! All manufacturing is carried out in the factory, making
for a clean installation. |
| |
|
| Q: |
How long does it take to manufacture my glass? |
| A: |
Manufacturing time is 7-10 working days on average from check
measure in most times and in extreme times eg: Christmas rush
12- 15 days. |
| |
|
| Q: |
Does Polytech coloured glass come with a warranty? |
| A: |
Yes! Polytech coloured glass products come with a 5-year
warranty. Against discolouring and delamination of the coating
and on all our workmanship.
|
| |
|
| Q: |
How do I care for my Polytech coloured glass? |
| A: |
We recommend for best results to use a streak free glass
cleaner with a good quality paper towel or lint free cloth. Avoid
abrasive harsh cleaners, scouring pads or steel wool; also avoid
the use of spirits or solvents to clean the glass. |
| |
|
If you have any
further questions that you would like to have clarified or
answered please do not hesitate to contact
us.
Our expert friendly
team will be more than happy to assist you. |
